Military

SN: E683059. Made in 1920 with a 20-inch barrel that is chambered for the 12-gauge cartridge. Although this is a World War I-type martial 1897 Trench Gun, it does not have military acceptance marks because the gun was made after the 1918 Armistice. Nevertheless it is a true USGI solid frame 1897 Trench Gun with a heat shield that has six rows of ventilation holes & a bead front sight...

SN: 85429. Made in 1942 with a 26-inch barrel equipped with a "bead on ramp" front sight & chambered for the 12 gauge cartridge. This U.S. Property marked Model 720 semi-automatic shotgun is in excellent condition with original factory parkerized finish present on all metallic parts & marked "*** *" on the left side of the barrel. The buttstock is in excellent condition & the...

SN: 70450. Made in 1963 with a 20-inch barrel chambered for the 12 gauge cartridge. Overall condition is excellent with original factory parkerized finish across the metallic parts with some isolated patches of pitting on the receiver, magazine tube & barrel. The buttstock is excellent with no dings, dents or scratches, but the forearm is not matching in terms of color (although it IS...

SN: 30922. Made in 1963 with a 20-inch barrel chambered for the 12 gauge cartridge. This is a fine example of the most widely used martial shotgun of the Vietnam-era with original factory parkerized finish on all metallic parts that has aged into a dull grayish green. The buttstock is excellent with a square sans serif "P" on the pistol grip & the letters "RRAD" ("Red River Army Depot")...

SN: 38670. Made in December 1940 with a 26-inch barrel chambered for the 12 gauge cartridge. This example is a ribbed training version of the Model 31 with original factory blued finish present on the metallic parts as well as U.S. Property marks including "RLB" (Roy L. Bowlin) on the left side of the receiver just above a flaming ordnance bomb. The barrel is marked "IMP CYL" & the name...

SN: S30363. Modern production. 12 gauge with a 20" barrel, bore is excellent. Reproduction trench gun with parkerized finish, heatshield, bayonet lug and walnut stock. Overall in excellent condition.

SN: 497433. Manufactured circa 1940, 12 Gauge with a 20" barrel. WWII U.S. military riot shotgun. The receiver is marked with a "U.S. bursting bomb" and "Military finish", the barrel is marked with a "bursting bomb." The barrel has a cylinder bore and is chambered for 2 3/4" shells. The LOP is 14". The stock is excellent condition with a Ordnance wheel and "FJA" acceptance mark on the left...

SN: 491149. Circa 1940s. 12 gauge with a 20" barrel, bore is excellent. US military riot shotgun with cylinder choked barrel and 2.75" chamber. Receiver is marked with US, flaming bomb cartouche and MILITARY FINISH. Barrel does have some light speckling and stock has been replaced. Overall very good condition with a small pitting on left side receiver.

SN: 52175. Manufactured in 1942. 12 gauge pump action shotgun with a 20" barrel, 2 3/4" chamber. LOP is 14". Bore is excellent. U.S. riot military shotgun with US proof marks on the left side of the barrel and receiver. Approximately 80% finish on receiver, barrel has light patina, waterfowl engraved receiver, replacement stock and has handling wear. Overall condition is good.

SN:Y122175D20. Tactical home defense shotgun with an 18.5" barrel, a magazine tube extension, and a pistol grip. In excellent condition.

WWII U.S. military trench gun with 20" barrel. The shotgun is in the proper serial number range and is also marked U.S. on the left side of the receiver. The bore is excellent. The action works perfectly. The stock and forend are very good. The buttstock has a factory slotted sling swivel. Has original butt plate. The barrel is a non-marked Stevens replacement barrel. Overall excellent.

Desirable WWII Trench gun. Left side of frame is marked "US" and has P over flaming bomb. Barrel also has P over flaming bomb marking and measures 20". Comes with a Remington manufactured 1917 bayonet. Very good overall condition.

US marked flaming bomb marked on barrel. Barrel has a Cutt's Compensator. Length of pull is 13 1/2" with pad. Trigger guard has a number added. Very good overall condition.