Modern Custom Knives (12)

Steve Mullin Damascus Drop Point Hunter (K1155 )

$275.00

Steve Mullin Damascus Drop Point Hunter. 3 3/4" high carbon Damascus steel blade forged by Mullin. Stainless bolster and polished Cocobolo handle. Leather sheath included. Another very nice piece from Steve Mullin.

Previously sold

Richard Rogers Semi-Skinner (K1152 )

$250.00

Richard Rogers Semi-Skinner. 7 3/4" overall length with 3 9/16" ATS-34 flat ground blade. Nickel Silver guard and Koa Wood handles that are polished so well the colors seem to shift and the handle comes to life. With sheath and zipper pouch.

Previously sold

Roger Russel Drop Point Hunter (K1149 )

$175.00

Roger Russel Drop Point Hunter. 4" 440C steel blade with deep choil and sculpted Cocobolo scales. Some file work along spine. Tapered tang with Brass spacers and Brass Pins. Very nice work and very comfortable in the hand. Comes with zipper pouch.

Previously sold

Eldon G. Peterson Engraved Fixed Blade (K1145 )

$850.00

Eldon G. Peterson Engraved Fixed Blade. 4 1/2" hand rubbed ATS-34 steel blade. Deeply engraved stainless scales with 4 Mother of Pearl inlays. Very attractive knife that is sure to draw attention!

Previously sold

Ken McFall 6 1/2" Bowie (K1142 )

$525.00

Ken McFall 6 1/2" Bowie. With an overall length of 11 1/4", this is decent sized knife that will fill up the hand with its finger grooved Black Ash Burl handle. With Buffalo Horn spaces. Mirror polish ATS-34 blade and Brass hilt and pommel. Beautiful hand tooled sheath by Sonja Lee. Zipper case included.

Previously sold

Jim Ence Damascus Dagger (K1137 )

$1,995.00

Jim Ence Damascus Dagger. Jims work is timeless and never ceases to amaze! Hand forged 7" Damascus blade, Damascus double guard, Damascus spacer, and Damascus pommel. Mirror polished stainless fittings. Perfect all the way around. Stunning example of a legendary craftsman's art.

Previously sold

F. Velasquez Fighter (K1131 )

$475.00

F. Velasquez Fighter. 9", double edge blade with Brass guard and carved Ironwood handle 14½" overall length and comes with a nice leather and Brass sheath.

Previously sold

R.C. Knipstein Model 5 (K1128 )

$1,295.00

R.C. Knipstein Model 5. Doc Knipstein did a wonderful job on this Model 5. Sporting a 6 1/2" ATS-34 steel blade in a hand rubbed finish and some beautiful Popcorn Stag scales. Stainless floral pattern bolsters were engraved by Simon Lytton and the bolsters are dovetailed as well. This knife was pictured in Knives Illustrated of April 1995 on page 47. A copy of the page is included. 1 foot long...

Previously sold

Dennis E. Friedly Gold Nugget Bowie (K1127 )

$1,300.00

Dennis E. Friedly Gold Nugget Bowie. Stunning knife! 8 1/2" mirror polish, razor sharp ATS-34 steel blade. Kingwood handle with sculpted Gold spacers. Handle feels fantastic. The man from Cody, Wyoming does it again. Comes with zippered pouch.

Previously sold

Barry Davis Pocket Folder. (K1047 )

$995.00

Barry Davis Pocket Folder. Talk about a knife with great fit and finish! This is a fantastic pocket knife with a 2 1/2" Damascus blade. The bolster is also Damascus. The liners are Nickel Silver and have some file work. The blade, spacer, and lock all have rope file work. The Black Lip Mother of Pearl is stunning!

Previously sold

Bill Reddiex Mini Fighter (K1118 )

$425.00

Bill Reddiex Mini Fighter. An interesting knife with a 3 1/4" hand rubbed blade and bolster. The Mother of Pearl scales are very attractive. The unusual part is the sheath. Made from Ebony wood, and using a metal retainer that locks into the back of the knife.

Previously sold

Terry Knipschield Stag Lock Back (K1112 )

$395.00

Terry Knipschield Stag Lock Back. Great pocket knife and very attractive. Mirror polish stainless bolsters and a 3" ATS-34 steel blade set with some nice and thick slabs of polished stag. Fantastic fit and finish!

Previously sold

W.D. Pease Triple Inlayed Folder (K1109 )

$1,200.00

W.D. Pease Triple Inlayed Folder. This nice folder makes life a little better-nice to look at, use, and an absolute joy in the hand. The blade is 3" of Satin finished ATS-34 and has a nail nick to open. The inlays are Mokume and Green Sea Snail. Rich file work runs down the blade and back spacer. This lock back is a fine example of Mr. Peases work.

Previously sold

D Alton Holder Stag Hunter (Small) (K1105 )

$395.00

D Alton Holder Stag Hunter (Small). Another great piece of work featuring a 3 1/4" ATS-34 steel blade with a full, tapered tang. The overall length on this beauty with stag scales and Nickel Silver furniture is 7 1/4". Comes with a hand made sheath.

Previously sold

Vince Evans Damascus Clip Point Hunter (K1097 )

$575.00

Vince Evans Damascus Clip Point Hunter. Very beautiful Damascus pattern on this knife. Simple and elegant, this is a knife at its basic level. But yet there is just something profound about it. The Hawaiian Koa wood handle and Brass furniture looks great. But you know a great knife when you see one. This is the one. The one with the 4 3/8" blade. A work of everyday, useable art.

Previously sold

Bill Reddiex (New Zealand) Engraved Belt Knife...

$550.00

Bill Reddiex (New Zealand) Engraved Belt Knife. An attractive everyday knife. 3 3/4" Satin finish ATS-34 blade with beautiful deep engraving by J. Jones on the 416 stainless bolsters. Nicely fitted Mother of Pearl scales to the tapered tang. Sure to please!

Previously sold

William Cheatham Flint Trailing Point Hunter...

$425.00

William Cheatham Flint Trailing Point Hunter. Another fine piece of work from William, this hunter features a polished stag handle with a Nickel Silver guard and a Coral spacer. The blade is 4 1/2" of ATS-34, made to resemble chipped flint. The leather sheath is hand tooled.

Previously sold

D Alton Holder "My Knife" (K1081)

$500.00

D Alton Holder "My Knife". Another of D Altons classic knives, this one has a Maple Burl and an Amber handle with Nickel Silver spacers. The blade is 4 1/2" of mirror polished ATS-34, and the overall length is 8 3/4". The pommel and guard are Nickel Silver. Some of the Nickel Silver on the guard is flaking and we have marked this knife down accordingly.

Previously sold

Scott Dingman Skinner (K1076 )

$175.00

Scott Dingman Skinner. Good 3 1/4" ATS-34 steel blade with Bocote and Ebony wood handle. Brass bolster and guard in high polish and the guard has a couple of very light rough spots. Leather sheath included. Really good custom knife for a nice price.

Sales Pending

Randy Lee Hunter (K1072 )

$400.00

Randy Lee Hunter. This is a very nice hunting knife with an overall length of 10". The mirror polish (which Randy is a Master of) ATS-34 steel blade measures in at 5 3/8". Nickel Silver guard and pommel accentuate the wooden handle with Brass and Micarta spacers. As always, a Sonja made sheath gives this steel companion a welcome home.

Previously sold